Brand wire drawing machine equipment warranty:

The equipment needs to be thoroughly maintained and inspected once a month (with a 4-hour shutdown).

1. Daily maintenance:

⑴ Keep the exterior of the equipment clean and hygienic, and check whether the gas supply pipeline and quick connector are in good condition.

⑵ Lubrication of upper and lower bearing seats and lifting screws (grease gun lubrication).

⑶ Drain the accumulated water from the air filter.

⑷ Check the sand belt and make balance adjustments.

2. Weekly maintenance:

⑴ Remove the sludge left by daily maintenance and perform lubrication maintenance according to the daily maintenance requirements.

⑵ Check the conveyor belt and its tension (if the tension is too loose, please adjust it to moderate).

⑶ Check the sand belt and its tension (if the tension is too loose, please adjust it to moderate).