The components of the circular loom include the following:

The main engine of a circular loom consists of a motor, a reduction system, and a machine base to form a transmission system. The slider is driven by the main turntable, and the slider drives the brown belt (brown frame). Brown wire, combined with jump bar (tension bar) components, ring gauges, etc., forms an opening mechanism. The weft insertion mechanism is composed of a shuttle rod, shuttle, etc. The circular loom does not have a dedicated beating structure. It is driven by the tension rod on the shuttle to drive the front roller, which runs around the circumference of the shuttle to pull the flat ribbon into and towards the ring gauge (weaving mouth), completing the beating. The host part is driven by a frequency converter with a motor to achieve the rotation of the main turntable, which is woven into the warp yarn.

Vulnerable parts, such as; Shuttle wheel, slider, brown belt and brown wire, rubber wheel, 6000 bearings and 626 bearings, snap spring, shuttle wheel, friction wheel, nylon gear, shuttle disc, wire guide, adjustable clamp, double headed screws, balance wheel, bracket length and short, front and rear shuttle heads. As for adjusting the flatness of the fabric, a weft leveler needs to be installed. Nowadays, most of the 2.2kW main motors without sliders have been retrofitted. We need swing arms and swing arm bases, as well as rollers and roller columns with wide specifications.